Kvaser PCIEcan 2xHS v2 is a highly integrated, high speed controller area network (CAN) network card that adds two high speed (ISO 11898-2 compliant) CAN channels to any standard computer board with PCI Express capability. At 86 x 69 mm, this has a smaller form factor and lower profile than the Kvaser PCIEcan 2xHS and includes a DS9 to 2xDS9 splitter cable.

Offering silent mode, error frame detection/generation and an on-board buffer, this add-on board fits many embedded data acquisition systems and is CAN FD compliant.

Feature List

• Standard (PCIe-x1) PCI Express interface.
• Quick and easy plug-and-play installation.
• Supports High Speed CAN (ISO 11898-2) up to 1Mbit/s.
• Supports CAN 2.0 A and CAN 2.0 B active.
• Supports CAN FD up to 8Mbit/s (with proper physical layer implementation).
• Low profile card allows ultra-compact systems.
• Includes low and high profile brackets.
• Implements Kvaser’s CAN IP in an FPGA, resulting in high max message rate.
• Two CAN Hi-Speed channels in a single 9-pin D-SUB connector. The 9-pin splitter connects to the CAN bus via two 9-pin D-SUB connectors.
• Yellow LEDs indicate when a CAN message was received or sent.
• Fully compatible with J1939, CANopen, NMEA 2000 and DeviceNet.
• Fully compatible with applications written for other Kvaser CAN hardware with Kvaser CANlib.
• Supports silent mode for analysis tools – listens to the bus without interfering.
• Detection and generation of error frames and remote frames.
• Designed for standard and industrial computers.
• Galvanically isolated CAN bus drivers.
• Extended operating temperature range from -40 to 85 °C.

For additional information, check out the following link

Please use the link provided to view the data sheet